Evans Motorsport Performance

A part of the EMP premium line of Mustang products made in the USA from 1/8" aluminum and powder coated matte black, this rear diffuser will definitely make you stand out from the rest with aggressive styling and quality above the other diffusers out there. Diffuser blades on stock diffuser are centered with the EMP diffuser blades for a clean professional look unlike the uncentered lopsided blades of our competitors diffusers. Easiest install of all the diffusers on the market with mounting holes (yes the competition has NO mounting holes so you just guess where to put the screws in), slotted attachment to two existing bolts to ensure center section is perfectly centered and adjustable to get the desired gap from rear of car. Comes with black stainless steel screws, nuts, bolts, brackets and stainless steel lock washers. Strong and remained steady during 155 MPH test - Lapped the Daytona 500 Race Track with one installed. Easy installation - installation video at bottom of page.

2018+ EcoBoost version available now!

Specifically designed for 2015-23 Mustangs with stock rear bumper shown in pictures below. Will not fit Shelby models or Mach 1.

(Glossy black shown in pictures. White edges can be painted by buyer if desired.)

Fits stock bumpers shown below.

2015-17 GT, V6 and EcoBoost ↓

2018-23 EcoBoost ↓

2018-23 GT and EcoBoost High Performance Pack ↓

FEATURES

• Premium Rear Diffuser is Made in the USA from 1/8” Aluminum

• Powder Coated Matte Black for High Durability and Enduring Good Looks

• Adjustable So You Can Set at the Desired Distance from Rear of Car

• Exotic Muscle Addition That Will Make Your Mustang Stand Out

• Simple Screw-In Installation. Step-By-Step Instructions Provided.

• Custom Made for the 2015-2023 S550 Mustang with stock rear bumper (will not fit Shelby models or Mach 1)

DESCRIPTION

Exotic Muscle Styling. Premium adjustable rear diffuser custom designed to match the contours of your Mustang and stand out from the others. Adds an aggressive low look that will turn heads wherever you go.

EMP Precision Quality. Made in the USA from 1/8” aluminum then powder coated matte black for a strong durable finish. Precision machined for a great fitting high quality product.

Simple Screw-In Installation. Unlike other rear diffusers, this diffuser has mounting holes so it can be screwed securely to your stock diffuser underside using existing screws plus additional provided stainless steel screws and lock washers. No random holes, missed connections leaving ugly extra holes or crooked uncentered mounting like the other diffusers. Slotted mount to adjust distance from side of car. Assembly required before installation.

Application. Custom designed for 2015-2023 S550 Mustangs with stock rear bumper (will not fit Shelby models or Mach 1).

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 1 Hour

Difficulty Level:

Simple

Installation Guide

Printed installation guide (PDF can be downloaded by clicking here)

What’s in the Box

• (1) Rear Diffuser Center Section
• (2) Rear Diffuser Driver and Passenger Side Blades
• Stainless Steel Assembly and Mounting Hardware
• Assembly and Installation Guide

Mustang products made in the USA from 1/8" aluminum and powder coated semi-gloss black, this wicker bill has unique styling to separate it from the rest out there. Includes clear Lexan gurney flap. Strong and remained steady during 100 MPH wind test. Installation requires drilling into the stock PP1 wing. You will need an 11/64 drill bit (click here for an example), power drill, screw driver, masking tape, tape measure and a rivet nut tool with 10/32 adapter (click here for an example). Premium black stainless screws with billet aluminum machined countersunk washers for a clean look that will handle the elements. Installation video below.

Specifically designed to attach to Mustang Performance Pack 1 wings shown in pictures. This wicker bill is an add-on and does not include the wing on the car.

(Wicker Bill is all semi-gloss black)

FEATURES

• Premium Wicker Bill add-on wing is Made in the USA from 1/8” Aluminum

• Powder Coated Semi-Gloss Black for High Durability and Enduring Good Looks

• Clear polycarbonate Gurney Flap included

• Provides extra downforce to help keep the rear end planted

• Exotic Muscle Addition That Will Make Your Mustang Stand Out

• Custom Made for the S550 Mustang Performance Pack 1 pedestal style wing

DESCRIPTION

Exotic Muscle Styling. Premium Wicker Bill is custom designed to match the shape of your Mustang Performance Pack 1 wing and stand out from the others. The aggressive shape is unique and the form fit is unrivaled.

EMP Precision Quality. Made in the USA from 1/8” aluminum then powder coated semi-gloss black for a strong durable finish. Precision machined for a great fitting high quality product.

Drill and Screw-In Installation. Drilling into the Performance Pack 1 wing is required to mount this Wicker Bill. Drilling the 7 mounting holes is an easier process than you would think. Inserting and seating the rivet nuts is simple and the 19/64 drill bit is inexpensive to get.

Application. Custom designed for S550 Mustang Performance Pack 1 pedestal style wing. Will not fit any other wing.

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 1 Hour

Difficulty Level:

Moderate

Installation Guide

Printed installation guide

What’s in the Box

• (1) Wicker Bill
• (1) Clear Lexan Gurney Flap
• Stainless Steel and Aluminum Assembly and Mounting Hardware
• EMP Gurney Flap Support
• Assembly and Installation Guide (Download PDF HERE)

FEATURES

• Deletes Rear Seats

• Removes up to 30 Pounds Improving Power-To-Weight Ratio

• Easily holds 100 lbs per side (tested to 150 lbs per side)

• Perfect Fit That Will Add to the Looks and High-Performance Aesthetic of Your Mustang

• More Mounting Points to Keep from Flapping, Rattling and Flying Open When Driving

• Simple Bolt-In Installation and no Cutting of Anything. Step-By-Step Instructions Provided.

• Easy to Return to Stock as Nothing is Permanently Modified or Cut.

• Custom Made for 2015-2023 S550 Mustang GT, EcoBoost and V6 Fastbacks (Coupes)

DESCRIPTION

Drop Weight. By removing weight, you can go quicker, so remove up to 30 pounds with this rear seat delete kit. A must for anyone who wants to get every bit of performance out of their Mustang.

EMP Precision Quality. Made in the USA from tough lightweight ABS plastic and designed to fit like an OEM product. Bottom can handle more weight than the competition without deforming thanks to six mounting points. Precision machined for a great fitting high quality product.

Secret Storage Space. Use the void under the seat delete kit to house audio equipment, performance electronics and other items out of sight for a clean look and better security.

Simple Slip-On and Bolt-In Installation. No need to cut anything or remove seat brackets, seat belts or interior plastic. Easy to follow step-by-step instructions included. Can be easily modified to fit roll cages, nitrous systems and most other custom setups requiring pass-through or location in the back seat.

Application. Custom designed for 2015-2021 Ford Mustang GT, EcoBoost and V6 Fastbacks (coupes). Does not fit convertibles.

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 1 Hour

Difficulty Level:

Simple

Installation Guide

Printed installation guide - PDF can be downloaded  by clicking here

What’s in the Box

• Rear seat back replacement panel

• Rear seat bottom replacement panel

• Style/logo mounting bar and lock chocks

• All required hardware

• Installation guide

Specifically designed for all 2015-2023 Mustangs, excluding convertible models.

FEATURES

• Protects sides of vehicle from tire spray and rocks

• Stylish design made to integrate perfectly with your Mustang

• Easy installation and will not fly off on highways or in car washes

• Made in the USA from strong ABS plastic

• Set of front and rear mud flaps

• Custom made for 2015-2023 S550 Mustang GT, EcoBoost and V6

DESCRIPTION

Keep Your Mustang Looking Good. Protect the sides of your Mustang from road debris and dirt while adding some style. Discreet, yet adds a more muscular look.

EMP Precision Quality. Made in the USA from tough ABS plastic and designed to fit like an OEM product. Precision machined for a great fitting high quality product.

Simple Installation Devised to Firmly Hold in Place. You don’t need to jack up your vehicle or take your tires off to complete the install and the mud flaps will remain firmly in place through car washes and at highway speeds. Using your car’s existing press in fittings and one supplied screw per flap, you’ll be back on the road quickly.

Application. Custom designed for 2015-2023 Ford Mustang GT, EcoBoost and V6

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 30 Minutes

Difficulty Level:

Simple

Installation Guide

Printed installation guide (Click for PDF and see video below)

What’s in the Box

• (2) Front mud flaps
• (2) Rear mud flaps
• (4) Screws
• (2) Clip nuts
• (2) Clips (optional to use)
• (1) Allen wrench
• Installation Guide

Specifically designed for all 2015-2023 Mustangs, excluding GT350 and GT500 models.

A part of the EMP premium line of Mustang products made in the USA from 1/8" aluminum and powder coated matte black (or choose textured ABS option), these chiseled 2-piece side skirts bring a sharp looking upgrade to your Mustang. Uses a stock screw to get placement right, plus 9 screws per side to securely hold in place. Slotted front and rear mounting holes provide adjustability to ensure you get the desired offset from the car. Comes with black stainless steel screws and lock washers.

Specifically designed for 2015+ Mustangs with stock side rockers shown in pictures (will not fit Shelby models).

BRAND NEW ITEM! SHIPS WITHIN 10 BUSINESS DAYS!

FEATURES

• Stylish Design Made to Integrate Perfectly with Your Mustang
• Easy Installation Without Having to Remove Anything from the Car
• 2-Piece Design Makes it Easier to Step out of your Mustang
• Premium Side Skirts are Made in the USA from 1/8” Aluminum (plus choice of textured ABS)
• Aluminum Version Powder Coated Matte Black for High Durability and Enduring Good Looks
• Adjustable So You Can Set at the Desired Distance from Car
• Simple Screw-In Installation. Step-By-Step Instructions Provided

DESCRIPTION

Super Car Styling. Striking design that will make your Mustang stand above the rest.

EMP Precision Quality. Made in the USA from 1/8” aluminum or textured ABS and designed to fit like an OEM product. Precision machined for a great fitting high quality product.

Simple Installation Devised to Firmly Hold in Place. No need to remove anything – simply add-on to existing side rockers. Uses 1 existing screw plus 9 provided screws per side to perfectly place rear pieces and slotted so you can adjust to desired offset from car.

Application. Custom made for 2015-2023 S550 Mustang GT, V6 and EcoBoost (will not fit Shelby models)

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 30 Minutes

Difficulty Level:

Simple

Installation Guide

Printed installation guide

What’s in the Box

• Two 2-piece side skirts
• Black stainless steel installation hardware
• Assembly and Installation Guide

A part of the EMP premium line of Mustang products made in the USA from 1/8" aluminum and powder coated matte black, these rear rocker splitters are a great addition to any S550 Mustang. Easy install will have you showing these off quickly. Uses 3 black stainless steel screws per side to securely hold in place. Installation video at bottom of page.

Specifically designed for ALL 2015-23 Mustangs

A part of the EMP premium line of Mustang products made in the USA from 1/8" aluminum and powder coated matte black, this bold front air splitter features side winglets (or version without), true support rods and the easiest installation of any front air splitter. Uses 8 stock screws to get placement right, plus 21 screws to securely hold in place. 3-piece main body design with slotted connection ensures a perfectly centered middle section and adjustable to get the desired offset from car. Comes with black stainless steel screws, nuts, bolts, brackets and lock washers. Strong and remained steady during 100+ MPH wind test. Installation video below.

Choose a version with or without the side winglet (version without side winglet ships  within 10 business days)

Specifically designed for 2018-23 Mustangs with stock front end shown in pictures (will not fit Performance Pack 2, Shelby models or Mach 1)

(Glossy black shown in pictures. White edges can be painted by buyer if desired.)

FEATURES

• Integrated Side Winglets and Version with No Side Winglets

• Support Rods Included with Double the Typical Support Strength

• Stylish Design Made to Integrate Perfectly with Your Mustang

• Easy Installation Without Having to Remove Front End of Car

• Premium Front Air Splitter is Made in the USA from 1/8” Aluminum

• Powder Coated Matte Black for High Durability and Enduring Good Looks

• Adjustable So You Can Set at the Desired Distance from Car

• Simple Screw-In Installation. Step-By-Step Instructions Provided

DESCRIPTION

Super Car Styling. Striking design that will make your Mustang stand above the rest.

EMP Precision Quality. Made in the USA from 1/8” aluminum and designed to fit like an OEM product. Precision machined for a great fitting high quality product.

Simple Installation Devised to Firmly Hold in Place. No need to remove your front end like other front air splitters and risk damaging your car. Uses 8 existing screws to perfectly place outer main body pieces and center section is slotted so you can adjust to desired offset from car. Once in place, tighten 8 screws and center mount bolts then install the 25 included mounting screws and support rods.

Application. Custom made for 2018-2023 S550 Mustang GT and EcoBoost (will not fit Performance Pack 2, Shelby models or Mach 1).

INSTALLATION & WHAT’S IN THE BOX

Installation Info

Installation Time

(approx) 45 minutes

Difficulty Level:

Simple

Installation Guide

Printed installation guide (click here for PDF or see video below)

What’s in the Box

• 3-piece Main Splitter Body

• Support Rods

• Black Stainless Steel Assembly and Installation Hardware

• Assembly and Installation Guide

Stand out from the other Mustangs with our bold adjustable side winglets made in the USA from 1/8" aluminum and powder coated matte black (glossy black shown). 8.375" Tall X 11.75" wide wing with 8.125" long under car slotted mount to adjust distance from side of car. Custom designed for Mustangs to match door and wheel well contours and horizontal body line. Comes with 10 black stainless steel screws and lock washers. Strong and remained steady during 150 MPH wind test. Easy installation - see instruction video below.

Specifically designed for all 2015-2023 Mustangs, excluding GT350 and GT500 models.