Chevrolet did an amazing job with the fifth-generation Camaro—minus the fact that the stock ride height looks more like a truck than a muscle car! Sure, you can use coil springs or coilovers to help tidy up the stance, but then you have to worry about scraping everywhere you drive, and endure less than optimal ride quality. Air Lift Performance has developed the ultimate no-compromise suspension, that offers slot-car-like handling, the lowest possible drop for a Chevy Camaro, and amazing ride quality. How is all of that possible, you ask?
Starting up front, Air Lift Performance engineers took a threaded body, monotube, 30-way, damping, adjustable strut and topped it off with a smooth-riding, double-bellow air spring. This combination will allow you to drop the front of your Camaro to 4.2 inches below factory ride height, and will allow you to swallow a 22-inch wheel with ease. The engineers didn’t stop there! This strut also has an integrated adjustable camber plate made from T6061 aluminum, utilizing a high-quality spherical bearing for the best in suspension adjustability.
The rear kit mimics the front, with the same double-bellow-style bag wrapped around another 30-way damping, adjustable, monotube shock. A high-quality monoball bearing is nestled in a beautiful, red, anodized upper-shock mount. This automotive work of art will drop the rear of your Chevy Camaro 4.2 inches from the factory off-road stance, and requires minimal modification to bolt right in.
It’s not all about fancy parts and a show-stopping stance, though. This suspension was designed on the race track with handling performance that leads the way in development. Not only will the air springs give you a smooth, progressive spring rate under hard driving, but the 30 levels of damping adjustment really allow you to fine-tune the ride, and give you the handling you are looking for. Go from a smooth, comfortable ride to race-car-stiff handling with the twist of the knob. What does this mean, exactly? It means you can have a comfortable drive to the track, change a couple of settings, and carve corners with the best of them. It also means that steep driveways and speed bumps will no longer make you cringe. With the push of a button, you can raise the car to factory height and clear pretty much any obstacle that comes along.
Detailed instructions will help you get your Chevrolet Camaro slammed within a few short hours. If you have the ability to wire a stereo or swap out suspension parts, you should have no problem installing this air suspension. If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch and can walk you through any questions you may have.
In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to 1 million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!
Isn’t it time you had the option of getting a killer lowered look without giving up ride quality and having to worry about scraping your ride? Ditch the springs and get to an entire new level of low.
MODEL FITMENT:
2010-2015 Chevrolet Camaro (including convertibles)
2010-2015 Chevrolet Camaro SS
2014 Chevrolet Camaro Z/28
INSTALLATION DETAILS:
Modifications Req. Front:Requires drilling of front strut tower for mounting
Modifications Req. Rear:Remove section of factory upper spring mount
Give your vehicle a full redesigned look! If you already have our s650 euros why not get yourself a new set of headlights to finish the look!
Priced as a set (driver and passenger sides)
2015-2017 model fitment for mustangs (GT500 & GT350 years 15-23, only 15-17 headlight configuration), they are full plug and play harnesses for USA/EU mustangs. No cutting, splicing, or re-wiring harnesses required for main functionality.
Switch back DRL: Sequential Turn Signal requires tap (optional)
Awaken The Beast: New Start up mode (wakeup animation)
For US vehicles the headlight comes ready to plug in, for EU models we add an additional plug-n-play harness to the kit.
The price is for a set, Which is still half the price of oem ($1600), with the same quality and appearance.
1 year warranty through manufacture, we will help set up claim.
Get yourself the 2024 mustang taillights, be the first in your area to have them! Stand out from the crowd!
*** Pre-Order January 2024 Launch***
2005-2009 model fitment for mustangs (any platform), they are full plug and play harnesses for USA/EU mustangs. No cutting, splicing, or re-wiring harnesses required. Third brake light is optional for hazards use (without harness hazards will be red, with harness will be same as turnsingal mode)
For US vehicles the taillight comes ready to plug in, for EU models we add an additional plug-n-play harness to the kit.
Certification: DOT/SAE Compliance
Priced as a set (driver and passenger sides)
Final fitment may vary slightly build to build. Minor adjustments to gasket may be required.
6 Mode (Amber/Red) -(Animation, no Animation,6 mode)
6 Mode (Amber/Red/RGB) - (Rgb, no rgb, 6 mode)
RGB taillight is app controlled through Bluetooth, this controls the DRL color. You can change colors to any solid color or go through the different rgb options in the settings. This includes a RGB setup similar to Flow for car shows and events
Red Modes
All on, all off
1 on, 1 off, 2 on, 2 off, 3 on, 3 off
1 on, 2 on, 3 on, all off
Amber Modes
All on, all off
1 on, 1 off, 2 on, 2 off, 3 on, 3 off
1 on, 2 on, 3 on, all off
We have upgraded the internals of the 2024 style mustang taillights, we are expanding our warranty for this product from 1 year warranty to a 2 year manufacture warranty.
Give your vehicle a full redesigned look! If you already have our s650 euros why not get yourself a new set of headlights to finish the look!
Priced as a set (driver and passenger sides)
2018-2020 model fitment for mustangs (excluding GT500 & GT350, only 18+ headlight configuration), they are full plug and play harnesses for USA/EU mustangs. No cutting, splicing, or re-wiring harnesses required for main functionality.
Switch back DRL: Sequential Turn Signal requires tap (optional)
Awaken The Beast: New Start up mode (wakeup animation)
For US vehicles the headlight comes ready to plug in, for EU models we add an additional plug-n-play harness to the kit.
The price is for a set, Which is still half the price of oem ($1600), with the same quality and appearance.
1 year warranty through manufacture, we will help set up claim.
Smoked reflector are build to order 3-8 week build lead time
Give your vehicle a full redesigned look! If you already have our euros why not get yourself a new set of headlights!
Priced as a set (driver and passenger sides)
2005-2009 model fitment for mustangs, they are full plug and play harnesses for USA/EU mustangs. No cutting, splicing, or re-wiring harnesses required for main functionality.
100% plug-n-play with instructions included
Awaken The Beast: New Start up mode (secret initial sequential mode)
Give your vehicle a full redesigned look! If you already have our euros why not get yourself a new set of headlights!
Priced as a set (driver and passenger sides)
2005-2009 model fitment for mustangs, they are full plug and play harnesses for USA/EU mustangs. No cutting, splicing, or re-wiring harnesses required for main functionality.
100% plug-n-play with instructions included
Awaken The Beast: New Start up mode (secret initial sequential mode)