Since the ‘60s, it’s been a model you can count on to get the job done, whether it’s winning championships on the NASCAR circuit or going zero to 60 on the daily commute. Its lightweight platform and quick, responsive steering pair perfectly with its sporty look, but it’s missing one thing – a slammed stance. Thankfully, Air Lift Performance has you covered.
By adding Air Lift Performance to your Camaro, you can get the mega-drop that our kits is famous for, with all of the adjustability needed to take care of those classic lowered car problems. There’s no need to worry about steep driveways, speedbumps, or in-road obstacles! With Air Lift Performance, you can adjust your ride height without even leaving your seat. And you know that you can trust Air Lift Performance because we’ve got a legacy of performance excellence – from bringing home a win in the first Daytona 500 to victories in today’s Redline Global Time Attack events.
The front kit for the Camaro features a pair of threaded-body, monotube struts, paired with our double-bellow air springs, in place of the OEM suspension. With 30 levels of adjustability, the dampers are completely customizable to your needs. Whether driving on the street or the track, you can perfectly tailor your suspension for your performance needs. Topped off with adjustable camber plates for precise steering feel, Air Lift Performance provides a comfortable ride while also dropping you 105mm (4.1”).
In the rear, it’s a similar formula – double-bellow air springs, fitted over threaded-body dampers, and a drop of 142mm (5.6”). With the same 30 levels of damping adjustability, you are guaranteed exceptional ride quality and high-performance, no matter the road quality.
Each Air Lift Performance kit comes with a detailed and fully illustrated instruction manual, helping you to get your car slammed in only a matter of hours. If you can install a stereo, swap out suspension parts, and own basic hand tools, you’ll have no problem getting your air suspension installed.
To ensure the longevity of the kit, all key suspension components have been tested on our hydraulic test rig for more than one million cycles, simulating around 100,000 miles, then tortured at extreme temperatures from -30º F to 150º F. Add that to our standard one-year, unlimited-mileage warranty – not to mention the Air Lift Performance reputation for exceptional customer service and technical support – and you can purchase this kit with peace of mind.
It’s time to take your Camaro to a whole new level of low and begin your #lifeonair.
HEIGHT SENSOR BRACKET:
Also now available from Air Lift Performance are our vehicle-specific height sensor brackets! Designed specifically for the Camaro, these no-drill, bolt-on height sensor brackets easily install with our3H height sensors, allowing you to reach precise vehicle heights, all at the touch of a button.
*NOTE: Does not fit models with MRC (Magnetic Ride Control)
INSTALLATION DETAILS:
Modifications Req. Front:This kit requires the removal of factory torque-to-yield bolts. These bolts are designed to be replaced (sold separately) after they have been loosened. Torque-to-yield bolts are indicated in the instructions and in the torque specification chart.
Modifications Req. Rear:This kit requires the removal of factory torque-to-yield bolts. These bolts are designed to be replaced (sold separately) after they have been loosened. Torque-to-yield bolts are indicated in the instructions and in the torque specification chart.
Compatibility Note Rear: Part Number 78665, is not compatible with the AutoPilot V2 system.
Discover the 2010-2011 Camaro Carbon Fiber Overlay Kit
Fit’s 2015-2020 mustang premium and non-premium models
Dynaperformance Carbon Overlay
100% real carbon fiber
3m backing
Quick and Easy Install
What is the Camaro Carbon Fiber Overlay Kit?
The 2010-2011 Camaro Carbon Fiber overlay Kit is designed to enhance both the appearance and performance of your Camaro. This kit features high-quality carbon fiber material that not only looks stunning but also adds a layer of protection to your vehicle’s original surfaces. When you install this overlay, you can achieve a sporty look without the hefty price tag of full carbon fiber parts, making it an ideal choice for any Camaro enthusiast.
Easy Installation and Customization
One of the best features of the Camaro Carbon Fiber overlay Kit is its user-friendly installation process. It comes with everything you need, including detailed instructions, which means you typically don’t need to be a car expert to apply it. This kit allows car owners to customize their vehicle's look while also being removable. So, if you decide you want to change up your style later, it won’t be a problem!
Durability and Performance Benefits
This carbon fiber overlay is not only about aesthetics; it also contributes to the longevity of your Camaro's surfaces. The durable material provides a protective shield against scratches, UV rays, and environmental wear. Consequently, your Camaro will maintain its fresh appearance for years, because you deserve to drive a car that looks as good as it performs!
Airlift Performance
2010-2015 Camaro AirLift Kit
Regular price
Sale price$2,647.00
10 in stock
Chevrolet did an amazing job with the fifth-generation Camaro—minus the fact that the stock ride height looks more like a truck than a muscle car! Sure, you can use coil springs or coilovers to help tidy up the stance, but then you have to worry about scraping everywhere you drive, and endure less than optimal ride quality. Air Lift Performance has developed the ultimate no-compromise suspension, that offers slot-car-like handling, the lowest possible drop for a Chevy Camaro, and amazing ride quality. How is all of that possible, you ask?
Starting up front, Air Lift Performance engineers took a threaded body, monotube, 30-way, damping, adjustable strut and topped it off with a smooth-riding, double-bellow air spring. This combination will allow you to drop the front of your Camaro to 4.2 inches below factory ride height, and will allow you to swallow a 22-inch wheel with ease. The engineers didn’t stop there! This strut also has an integrated adjustable camber plate made from T6061 aluminum, utilizing a high-quality spherical bearing for the best in suspension adjustability.
The rear kit mimics the front, with the same double-bellow-style bag wrapped around another 30-way damping, adjustable, monotube shock. A high-quality monoball bearing is nestled in a beautiful, red, anodized upper-shock mount. This automotive work of art will drop the rear of your Chevy Camaro 4.2 inches from the factory off-road stance, and requires minimal modification to bolt right in.
It’s not all about fancy parts and a show-stopping stance, though. This suspension was designed on the race track with handling performance that leads the way in development. Not only will the air springs give you a smooth, progressive spring rate under hard driving, but the 30 levels of damping adjustment really allow you to fine-tune the ride, and give you the handling you are looking for. Go from a smooth, comfortable ride to race-car-stiff handling with the twist of the knob. What does this mean, exactly? It means you can have a comfortable drive to the track, change a couple of settings, and carve corners with the best of them. It also means that steep driveways and speed bumps will no longer make you cringe. With the push of a button, you can raise the car to factory height and clear pretty much any obstacle that comes along.
Detailed instructions will help you get your Chevrolet Camaro slammed within a few short hours. If you have the ability to wire a stereo or swap out suspension parts, you should have no problem installing this air suspension. If you do run into a snag with installation, the Air Lift Performance tech support team is top-notch and can walk you through any questions you may have.
In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to 1 million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!
Isn’t it time you had the option of getting a killer lowered look without giving up ride quality and having to worry about scraping your ride? Ditch the springs and get to an entire new level of low.
MODEL FITMENT:
2010-2015 Chevrolet Camaro (including convertibles)
2010-2015 Chevrolet Camaro SS
2014 Chevrolet Camaro Z/28
INSTALLATION DETAILS:
Modifications Req. Front:Requires drilling of front strut tower for mounting
Modifications Req. Rear:Remove section of factory upper spring mount
S550Euros
2014-2015 Camaro Headlight Dual Beam
Regular price$575.00
0 in stock
Description Durability is a vital factor when choosing new headlights, and the 2014-2015 Camaro Headlights do not disappoint. Built with high-quality materials, these headlights are resistant to impact and weather, ensuring they will withstand the test of time. They are designed to provide consistent performance, even in challenging conditions. Because of their exceptional quality, you can drive with confidence, knowing that your headlights will perform flawlessly season after season.
Installation process Even if you are not a car expert, you can follow simple instructions to replace the old light with this new one. This means you won’t need to visit a mechanic or spend more money on installations as this will be a full plug-and-play harness with no cutting, splicing, or rewiring required. Detailed Instructions will be included to make this a quick install! Required: D2H Bulb 12V 6000K 35W ,LED bulb or HID bulb all can use, Xenon lamp requires decoder
Warranty There is a 1 yr warranty through our manufacture just email or DM us to set up your claim
Description Durability is a vital factor when choosing new headlights, and the 2014-2015 Camaro Headlights do not disappoint. Built with high-quality materials, these headlights are resistant to impact and weather, ensuring they will withstand the test of time. They are designed to provide consistent performance, even in challenging conditions. Because of their exceptional quality, you can drive with confidence, knowing that your headlights will perform flawlessly season after season.
Installation process Even if you are not a car expert, you can follow simple instructions to replace the old light with this new one. This means you won’t need to visit a mechanic or spend more money on installations as this will be a full plug-and-play harness with no cutting, splicing, or rewiring required. Detailed Instructions will be included to make this a quick install! Required: D2H Bulb 12V 6000K 35W ,LED bulb or HID bulb all can use, Xenon lamp requires decoder
Warranty
There is a 1 yr warranty through our manufacture just email or DM us to set up your claim
*** All orders are pre-production orders estimated 10-12 week build time***
2014-2015 model fitment for Camaros (any US platform), these taillights are plug and play with the exception of RGBW board power (which require a 12v constant tap, such as a battery tap or a fuse tap)
Priced as a set (driver and passenger sides)
Controlled with a Bluetooth BlueGhozt Lighting controller (allows RGBW and Flow series options)
Control show mode right from your phone! Change color or flow patterns being displayed on your taillghts!
Final fitment may vary slightly build to build. Minor adjustments to gasket may be required.
1 year warranty through NTXGlow, factory warranty is voided.
Vibrant RGBW Customization
The 2014-2015 Camaro RGBW Taillight offers stunning visuals that can enhance the exterior of your car. This product features RGBW technology, which means you get both vibrant colors and bright white lighting. Moreover, you can customize your tail lights to match your mood or to stand out in a crowd. With multiple color options available, you can easily switch from a subtle glow to a striking flash, making your Camaro truly one-of-a-kind.
Easy Installation and Durability
Installing the 2014-2015 Camaro RGBW Taillight is a breeze. These lights come with a plug-and-play setup, meaning you don’t need extensive tools or mechanical skills. Just remove your old taillights and plug in the new ones. Additionally, they are built to withstand various weather conditions, so you can be confident they'll last while rolling through rain or shine, ensuring your Camaro remains eye-catching year-round.
Enhanced Safety Features
Not only do the 2014-2015 Camaro RGBW Taillights look great, but they also improve your vehicle's safety. The bright LED lights provide better visibility to other drivers, especially at night or in poor weather conditions. This increased visibility is crucial, as it helps to prevent accidents and keep you safe on the road. So, with these taillights, you get style and security—an essential combination for any Camaro owner.